AAC Product Range – Blocks, Slabs and Panels

Major components of AAC product range are listed below:

1. Block

Most common component of AAC product range is AAC blocks. Generally AAC blocks are 24”-25” in length, 8”-9” in height and in varying thickness ranging from 3” to 12”. AAC blocks fall under strength class of AC2, AC4 or AC6. Some manufacturers provide handhold on AAC blocks.

2. U-block

This component of AAC product range is made by sticking three AAC plates with super-glue. AAC U-blocks are available in different sizes. These blocks are 24”-25” in length, 8”-9 1/2” in height and in varying thickness ranging from 8” to 12”. AAC U-blocks fall under strength class of AC4.

3. Tongue and Groove Block

Tongue and groove blocks are supplied with dimensions in range of 24”-25” in length, 8”-9” in height and in varying thickness ranging from 4” to 12”. AAC blocks fall under strength class of AC2, AC4 or AC6. Some manufacturers provide handhold on blocks thicker than 8”.

4. Cored Block

AAC cored blocks are available in length of 24”, height of 8” and thickness ranging from 8” to 12”. Cored blocks fall under strength class of AC2, AC4 or AC6.

5. Lintel

Some manufacturer provide lintels made from AAC. Such lintels are offered in various sizes. But usually the maximum length is 8’ with height of 8” and thickness ranging from 8” to 12”. AAC Lintels fall under strength class of AC4.

6. Jumbo Block

Jumbo blocks are similar to normal AAC blocks except for size. Such blocks are 24”-25” long, 8”-9” high and 4” to 12” thick. Jumbo blocks can have a flat face or tongue and groove ends. These blocks fall under AC2, AC4 or AC6 strength class.

7. Horizontal Wall Panel

Usual variety of AAC horizontal wall panels has maximum length and height of 20’ and 24” respectively. Thickness of such panels ranges from 6” to 12”. Strength class of such panels is usually AC4 or AC6.

8. Vertical Wall Panel

Most AAC verticals wall panels available in the market have maximum length and height of 20’ and 24” respectively. Thickness of such panels ranges from 6” to 12”. Strength class of such panels is usually AC4 or AC6. Certain manufacturers might offer different sizes to suit client’s requirements.

9. Interior Wall Partition

Wall partitions are used inside a structure to isolate some areas. Such wall partitions are 4” thick, 24” wide and 9’8” in height. Usual strength class of such wall partition is AC4.

10. Floor Panel

Floor panels are one of the most interesting among AAC product range. These panels can be used instead of conventionally building floors with concrete. Usually AAC floor panels are 20’ in length, maximum 24” in width and thickness ranging from 8” to 12”. Strength class is AC4 or AC6.

11. Roof Panel

Essentially similar to floor panels, roof panels are used in place of conventional roofing solutions. AAC roof panels are 20’ in length, maximum 24” in width and thickness ranging from 8” to 12”. Strength class is AC4 or AC6.

AAC Product Range

AAC product range

**Sizes mentioned above are indicative. Manufacturers might offer different sizes depending on local market dynamics and customer requirements. AAC product range might be wider than what is mentioned here.**

Leave a Reply

Your email address will not be published. Required fields are marked *